Bendpak 9APF (Bendpak XR-9 replacement) 2 post Lift. Available in two widths. No overhead gantry ideal for high-roof vans, servicing a mixed fleet. Low sports cars benefit from the AP arm geometry and dropped pad receivers. Â Lifting Capacity 4,082 kg.Â
Lifting Capacity 9,000 lbs. (4,082 kg)
Maximum Capacity – Front Axle 4,500 lbs. (2,041 kg)
Maximum Capacity – Rear Axle 4,500 lbs. (2,041 kg) Maximum Capcity per Lift Arm 2,250 lbs. (1,021 kg) A
Width Overall 136 or 146 in. (3,453 or 3,707 mm)Â
Base Plate Width 25.25 in. (642 mm)
Post Height 123 in. (3,128 mm)
Drive-Thru 91 or 101 in. (2,311 or 2,565 mm)Â
Inside Posts 108.25 or 118.25 in. (2,749 or 3,003 mm)
Outside Posts 129.5 or 139.5 in. (3,289 or 3,543 mm)
Minimum Height w/Pad 4.5 in. (114 mm)
Maximum Lifting Height1 73.5 in. (1,867 mm)
Maximum Rise2 70 in. (1,775 mm)
Maximum Pad Adjustment 2.25 in. (55 mm)
Floor Plate Height 1.4 in. (36 mm)
Floor Plate Width 9.5 in. (240 mm)
Asymmetric Arm Reach (min. – max.)3 22.25 – 47.5 in. (562 – 1,205 mm)
Symmetric Arm Reach (min. – max.)4 29.5 – 57 in. (747 – 1,446 mm)
Safety Lock Position 14 Positions spaced 3.62 in. / 92 mm
Time to Full Rise ≈62 Seconds