Bendpak 12APX Baseless Two Post Lift 5,443 kg Capacity OVERALL HEIGHT 169 in. / 4,294 mm
Bendpak 12APX – 119 Extra height Baseless Two Post Lift 5,443 kg Capacity. OVERALL HEIGHT 193 in. / 4,904 mm
Bendpak 12APX Baseless Two Post Lift 5,443 kg Capacity
- 12K LBS. Lifting Capacity
- Bi-Metric™ Lifting
- Low-Pro™ Triple-Telescoping Arms
- Performance Guaranteed
- Adaptable Design: Symmetric or Asymmetric
- Automatic Swing Arm Restraint System (ASARS)
- Durable Powder Coat Finish
- Double-Telescoping Screw Pads
- Padded Overhead Safety Shutoff Bar
- Exclusive Bi-Metric™ Arm Design
- Single-Point Safety Release
- Drop-End Arms
- Dual Hydraulic Direct-Drive Cylinders
- Electric/Hydraulic HVLP Power System
- Self-Lubricating Dura-Glide UHMW Polyethylene Bearing System
- Safety Locks in Each Column
- Heavy-Duty Aircraft-Quality Equalizer Cables
- Oversized Cable Sheave Diameter
- Four-Triple Telescoping Arms
Accessories Included:
- 2.5″ Medium Adapters (Set of 4)
- 5″ Tall Adapters (Set of 4)
- Adapter Holders (Set of 2)
- Drop-In Cradle Pads (Set of 4)
Optional Accessories:
- Quick-Fit Pinch-Weld Pucks (Set of 4)
- Quick-Fit Pinch-Weld Pads (Set of 4)
- Wide Frame Cradle Adapters (Set of 2)
- 2″ Low Adapter (Set of 4)
- Steel Lift Pads (Set of 4)
- Replacement Urethane Pads (Set of 4)
- Screw Pads (Set of 4)
Lifting Capacity 12,000 lbs. / 5,443 kg
Max. Capacity — Front Axle 6,000 lbs. / 2,722 kg
Max. Capacity — Rear Axle 6,000 lbs. / 2,722 kg
Max. Load per Lift Arm 3,000 lbs. / 2,268 kg
A – Max. Lifting Height w/ Pad (Top Lock)* 79.25 in. / 2,015 mm
B – Max. Lifting Height w/ Adapters** 87.75 in. / 2,229 mm
C – Max. Rise (No lock engaged) 76 in. / 1,932 mm
D – Min. Height w/ Pad 4.25 in. / 108 mm
E – Overall Height 169 in. / 4,294 mm
F – Width Overall 156 in. / 3,959 mm
G – Outside Posts 143 in. / 3,633 mm
H – Inside Posts 120 in. / 3,047 mm
I – Drive-Thru Width 103 in. / 2,619 mm
J – Floor to Top Switch 163.5 in. / 4,154 mm
K – Rear Arm Reach (min. – max.)*** 29.25 in. – 60 in. / 745 mm – 1,524 mm
L – Front Arm Reach (min. – max.)*** 26 in. – 55.25 in. / 660 mm – 1,404 mm
M – Base Plate Width 25 in. / 634 mm
Time to Full Rise 68 seconds
Motor**** 230 VAC, 50/60 Hz, 1 Ph, 5 HP, app 19.5 Amps
Bendpak 12APX – 119 Extra height Baseless Two Post Lift 5,443 kg Capacity
OVERALL HEIGHT 193 in. / 4,904 mm