Monthly Archives: April 2024

Liftmaster LMS3500SLEV / Nussbaum 2.35 SL EV

Liftmaster LMS3500SLEV  Electric Vehicle Lift. (Nussbaum Technologies 2.35 SL EV .German quality build) .  3500Kg Electro Mechanical Baseless 2 Post Lift designed primarily for electric vehicles but equally safely lifts low sports car and prestige car. Articulated arms swivel 90 degrees swinging adjustable pads on to the lifting points. With its low minimum height and flexible installation width, it fits into any car workshop. The simple cable connection between the columns can either be installed in the floor or via a simple, height-adjustable cable bridge at the top between the columns. The extra-flat arms with a lower height of the arms glide under all low cars. Recommended installation width 3350 mm. Pad height min 84mm Lifting height max 1900mm. Clear distance between columns 2650 – 2770 mm. Overall  height 3682 – 4133 mm. Total width 3230 – 3350 mm. Drive-through between carriages 2280 – 2520 mm. Drive-through between columns 2650 – 2770 mm. Motor power  1.5kw x 2. Supply 3 Phase: 440V Supply, Neutral & Earth Protected By 16 AMP (C or D-Rated) Breaker

Delivered and Installed with 2 years warranty, Available from UK Stock

AC 3200kg

AC Hydraulic SD32PHL 3200kg Jacking beam & AC Hydraulics SD40PHL 4000kg Jacking beam.

AC Hydraulic Jacking Beams for Vans & Light Commercials. Class VII .

AC Hydraulics SD32PHL 3200kg Jacking beam. With air operated pump. Top beam extends to 1610mm. Includes 3 X Height Extension Sets – 40mm 80mm & 130mm. Lift or Pit Mounting Arm Adapters . Delivered.  

1 off AC Hydraulics SD40PHL 4000kg Jacking beam. With air operated pump. Top beam extends to 1500mm.  Includes 3 X Height Extension Sets – 40mm 80mm & 130mm. Lift or Pit Mounting Arm Adapters . Delivered.  

AC Electric Jacking Beamwide jacking beam sd26l w banner

AC Hydrauilic Jacking Beams for Electric Cars

  • FLEXIBLE MOUNTING BRACKET SYSTEM Unique height adjustable mounting bracket system, which ensures a perfect fit on any lift – no matter the manufacturer.
  • LIFTING POINTS OUTSIDE OF ANY BATTERY FRAME Ensuring that electric cars can be lifted without damaging the battery pack.
  • FITS ANY LIFT Unique height adjustable mounting bracket system to fit any lift
  • 2000kg or 2600kg capacity
  • Flexible top support beam can be extended up to 1865 mm
  • Closed height of only 190 mm optimal for vehicles with a low clearance
  • Unique height adjustable mounting bracket system to fit any lift
  • Two-hand lowering operation with dead man’s release
  • Supplied with 3 extension sets (10/45/90 mm) and rubber cushion for protection of car body