Monthly Archives: November 2021

Garage Equipment | JBS Garage Equipment

Garage Equipment Supply www.jbsequipment.co.uk | Robust – Reliable · Two Post Lifts · Four Post Lifts · Scissor Lifts · Alignment Lifts · In-Ground Lifts · Liftmaster Garage Equipment | Bradbury Garage Equipment | Tecalemit Garage Equipment | Hofmann Garage Equipment | Cascos Garage Equipment | Gemco Garage Equipment

www.jbsequipment.co.uk

2 Post Lifts From 3 To 9 Tonne

Electro-Mechanical & Electro-Hydraulic Two Post Lifts From 3 To 9 Tonne Capacity. Liftmaster 2 Post Lifts | Gemco 2 post lifts | Cascos 2 Post Lifts | Bradbury 2 Post Lifts | Bendpak 2 Post Lifts | Tecalemit 2 Post Lifts.

Liftmaster LMB3200S 

Liftmaster LMB3200S  3.2tonne capacity Two post Lift c/w Base. Manufactured in Italy.415v 3 phase electrics. Shaft drive. Min pad height 100mm. Max lift 2050mm.

Width between columns 2488mm.Max width 3168mm.Front arms 500mm- 900mm, rear arms 810mm-1200mm.Site requirement 150mm concrete. Electro mechanical with auto lubrication on the screws. 2 years warranty

https://www.jbsequipment.co.uk/garage-equipment/6-two-post-lifts-based

Autolift 1.5T TRANSMISSION JACK

Autolift 1.5T MANUAL TRANSMISSION JACK. Capacity 1500kg. The jacks are designed and manufactured in the UK. For use in a pit, under column lifts or a 4 post lift, maximum 1.5 Tonners. Designed for removal or install of engines,  gearboxes etc. A foot pedal operated hydraulic pump allows an easy effortless lift and hands free operation. Precision engineered valves allow a controlled lowering. High Quality Castor wheels and side handles allows the units to be easily moved. The Jack comes with 2x ratchet straps to secure the gearbox in place when lowering or moving. The top square plate is a universal design with 4x moveable quadrants & the slots allow modifications to be made by the user to accommodate different gearboxes. Height (Min. 850mm. Max 1810mm) Width 850mm. Depth 800mm.  Load test certificate – supplied with each unit. CE markings – conform to EC directives.Delivered UK mainland with 5 years warranty

https://www.jbsequipment.co.uk/garage-equipment/1369-autolift-15t-transmission-jack-truck-bus-equipment-jacks-presses.html

Air Operated 20,000kg Pit Jack

Autolift 20T Air Operated 20,000kg Pit Jack

20 Tonne lift (double rams) 10 Tonne per ram. Can be operated independently.

Spring loaded roller bearing wheels retract when the jack is under load  locking its position.

Supplied with  2 x 125mm Extensions, 2 x Vee Head Adapters & 2 x Dish Head Pansies. *Accessory Rack Holder Not Included*

A high output air pump complete with delivery valve

Pre-set over pressure valve 

A high output air pump complete with delivery valve

‘Dead man’ release valve produces the high output flow to the cylinders.

The design offers air over oil hydraulic power for advance and retract of the cylinders.

Control is by a single air valve. Up for advance and power lift and down for retract.

Top quality using chrome plated rods and the latest seal technology to ensure a long and trouble free life.

Each cylinder fitted with safety hose burst valve and 90 degrees movement isolation valve for easy visual confirmation of its position.

Manufactured in accordance with Machinery Directive 98/37/EC and engineering standard: BS EN 1494:2001 (Materials handling equipment) complies with EC requirements. 

Each unit is fully tested, marked with serial number and supplied with a test certificate.

https://www.jbsequipment.co.uk/garage-equipment/1366-autolift-20t-pit-jack-jacking-beams-hgv.html

Airlift 40T. 40,000kg Pit Jack

Airlift 40T. 40,000kg Pit Jack.AIR POWERED HYDRAULIC PIT JACK WITH SECURITY STRUTS. Purpose designed high output air pump provides the power to two lifting cylinders. 

40 Tonne lift (twin rams) 20 Tonne per ram

Wheels with needle roller bearings to ensure easy movement up and down the length of the pit. Spring loaded are provided, these retract when the jack is under load so locking its position.

High output air pump complete with delivery valve

Pre-set over pressure valve

‘Dead man’ release valve produces the high output flow to the cylinders. The design offers air over oil hydraulic power for advance and retract of the cylinders.

Control is by a single air valve. Up for advance and power lift and down for retract.

Two double acting hydraulic cylinders are of top quality using chrome plated rods and the latest seal technology to ensure a long and trouble free life.

Each cylinder fitted with safety hose burst valve and 90 degrees movement isolation valve for easy visual confirmation of its position.

Designed and manufactured in accordance with Machinery Directive 98/37/EC and engineering standard: BS EN 1494:2001 (Materials handling equipment) complies with EC requirements 

5 year warranty.

Each unit is fully tested, marked with serial number and supplied with a test certificate.

UK Mainland delivered

https://www.jbsequipment.co.uk/garage-equipment/1367-airlift-40t-pit-jack-jacking-beams-hgv.html