Featured post

Atlas TC320 Plus Tyre Changer

Atlas TC320 Plus, with a three point-assist arm for lifting and depressing of the bead, the equipment is designed to limit the potential damage to alloy wheels.Tilt arm design, 3 position clamping jaws and power assist arm, making easy work of run flat tyres. Rim clamping : 10″ – 24″. Max. tyre diameter: 1000 mm (39”). Max. tyre width: 355mm) (13“).

Compac A10T HC (2)

Compac A10T-HC Air Operated Trolley Jack

Compac A10T-HC 10 tonne capacity. Especially designed for lifting heavy agricultural machinery and other vehicles with high ground clearance.A hybrid model featuring the “best of both worlds” with effortless air hydraulic lifting combined with the very long lifting stroke of 430 mm! Reaching a maximum height of 780 mm.

  • 100% air hydraulic.
  • Fast and silent air pump. Less than 70 dB.
  • Low entry height 150 mm. (* Without extension)
  • Maximum lifting height 780 mm. (** When using the extension)
  • Long lifting stroke 430 mm.
  • Standard with 200 mm extension.
  • Safe lifting with great stability on base of 4 heavy duty steel wheels.
  • Handle can be locked in an angle of 45 degrees for easy manoeuvering.
  • 3 years warranty
BM74000 1000x650px 9.jpg 2

BM7400 Load Simulator

BM7400 Load Simulator

  • Easily moved around by one person.
  • Easily and quickly released and moved when the vehicle needs to move forward.
  • The load sensing valve/function and suspension system of the vehicle is activated during test.
  • Advanced control software maintains the requested load when the vehicle airbags inflate.
  • The BM74000 chassis load simulation applies the load simulation directly from top-down onto the vehicle.
  • This system features a range of options that allows for a costumized configuration.
  • OPTIONS
  • Powered by an electrical pallet truck.
    • Easily moved around by one person.
    • Is moved to its position behind the vehicle or at the side.
  • Load capacity:
    • 10 ton (load applied directly over the axle being tested).
    • > 10 Ton (load applied behind the axle(s) being tested).
  • Fully controlled from a control panel placed at the rear of the pallet truck.BM74000 chassis load simulation control box
    • Enter requested load simulation, press START and the system will apply the load.
  • The load platform can be turned by hand to fit into – and onto – practically any vehicle with a suitable flat area:BM74000 chassis load simulation
    • Any vehicle with an open flat bed.
    • Tractors where load is applied to the fifth wheel.
    • Closed box trucks and trailers with an opening.
    • Semi-trailers.
  • Optional WLAN communication with the brake tester.
    • Allows for control of the applied load using the RBT weighing.
    Supplied with installation rails. Delivered and commissioned on a prepared site(We can arrange all the civil works if required).Price On Application