The Haweka AXIS500 is the latest truck laser wheel aligner, using it’s vast experience from the early models the AXIS500 has evolved as a state of the art laser aligner. The Haweka Axis systems can work on all types of vehicles with the correct accessories.At home in the workshop or on the road as a mobile unit the AXIS500 delivers fast and accurate results. AXIS500 has the latest in electronic/digital inclinometer technology. No more calculating castor, immediate readout from AXIS500 electronic/digital inclinometer.

The AXIS500 has the latest in electronic/digital inclinometer technology. No more calculating castor, immediate readout from AXIS500 electronic/digital inclinometer. All measurements take place in the 3D digital inclinometer and you have quick read out of camber, castor, kingpin inclination angle and toe out on turns. (Toe left and right and total toe are measured with the lasers.)

• ACCURATE All measurements taken in the as-driven position, because the vehicle is driven onto Haweka’s heavy-duty turnplates. No longer required to lift the axles to perform run-out compensation.
• VERSATILE  Can be used on or off site. A level floor is not necessary as the AXIS500 can be calibrated to suit any work place in just seconds.
• FAST  Quick clamps fitted as standard. Magnetic feet allow the operator to carry out alignment very quickly. Generally all important angles can be measured in under 10 minutes! An industry first.
• COMPETENT  Measures all the following angles. toe, camber, toe out on turns, caster, Kingpin, axle off set, axle parallel – chassis to axle square.
• STATE OF THE ART  Latest electronic digital measuring equipment. Class 2 laser give safe & powerful beams ensuring accuracy.
• COMPACT  Complete system is supplied in heavy-duty wooden trunk on castors, ensuring portability and protection for your investment.

HAW/922000050S

• AXIS500S Laser Wheel Alignment system

• Complete with laser heads

• Capable of measuring total toe, single toe and rear axle out of square

HAW/922000050 •

As AXIS500S with inclinometer for measuring turning angles at +/-20° without floor-scales

• Capable of measuring as AXIS500S + camber, caster, KPI and toe-out on turns