DVSA - ATF Test Lane

DVSA ATF Lane incorporating  testing of Class IV & VII  Vehicles.

Increase the lanes profitability by including pre testing with your own fitters.

VAMAG 20tonne RBT tester aprroved Class IV, V, VII, HGV & PSV Testing.

Commercial Play detectors.

H/Duty Class IV & VII Radius Plates

HGV Beam Tester

20 tonne Jacking Beam with all accessories including adjustable beam for Class IV & VII vehicles.

Combined  Diesel Emissions Analyer

HGV and Class VII VOSA Tool Boards and Accessories

Commincations System.

£10K rated Cupboard Safe

CCTV One Camera kit

All delivered, installed on a prepared site, calibrated, commissioned with full onsite training.

Includes

An Everquip Prefabricated HGV testing pit, we have allowed 2 days for digging out .  Uneven floors may incur additional costs.

• Material Steel
• Length 13.00 metres
• Width 1.00 metre
• Depth 1.65 metres
• Finish Internal White Gloss - External zinc phosphate
• Jacking Rail 50mm x 50mm rail 200mm above pit floor level
• 5 x Light Recesses with1.5 metre 240 volt 50 Hz twin tube category 3 zone 2 lights
• Compressed Air  3  points, 1/2" galvanised pipe
• Full length, spillage sump one end
• Entry & exit tunnel with full width steps at one end, exit tunnel with vertical ladder the other end
• Electrical Socket  110V or 24V Flame proof (Max 16A) Transformer by others
• Sumps To suit check wear unit (with service ducts to Pit / 5.00 metres long) and to suit free standing brake tester (with service ducts to Pit /5.00 metres long)

*   Fully installed based on using 1.75m3 of concrete per linear metre.

£98,540.00 + VAT or  £528.00+vat per week based on  optional  60 months lease finance ( £2285.00+vat per month)