BM74000 1000x650px 9.jpg 2

BM7400 Load Simulator

BM7400 Load Simulator

  • Easily moved around by one person.
  • Easily and quickly released and moved when the vehicle needs to move forward.
  • The load sensing valve/function and suspension system of the vehicle is activated during test.
  • Advanced control software maintains the requested load when the vehicle airbags inflate.
  • The BM74000 chassis load simulation applies the load simulation directly from top-down onto the vehicle.
  • This system features a range of options that allows for a costumized configuration.
  • OPTIONS
  • Powered by an electrical pallet truck.
    • Easily moved around by one person.
    • Is moved to its position behind the vehicle or at the side.
  • Load capacity:
    • 10 ton (load applied directly over the axle being tested).
    • > 10 Ton (load applied behind the axle(s) being tested).
  • Fully controlled from a control panel placed at the rear of the pallet truck.BM74000 chassis load simulation control box
    • Enter requested load simulation, press START and the system will apply the load.
  • The load platform can be turned by hand to fit into – and onto – practically any vehicle with a suitable flat area:BM74000 chassis load simulation
    • Any vehicle with an open flat bed.
    • Tractors where load is applied to the fifth wheel.
    • Closed box trucks and trailers with an opening.
    • Semi-trailers.
  • Optional WLAN communication with the brake tester.
    • Allows for control of the applied load using the RBT weighing.
    Supplied with installation rails. Delivered and commissioned on a prepared site(We can arrange all the civil works if required).Price On Application
JAS mobile

JAS Mobile Steel Heavy Duty Work Benches

Heavy Duty Steel MOBILE WORKBENCHES

  • The top supplied is galvanised steel.
  • Offer invaluable flexibility in use and positioning and are particularly useful to the service engineer and in the motor industry.
  • A lockable cupboard and vice plate are fitted as standard and we offer a choice of length and depth.
  • Shown with optional vice
LIftmaster LME4001

Liftmaster LME4001 (RAV KPH-40NCGA) / Liftmaster LME4003 (Rav KPH-40NECGA)

Liftmaster LME4001 (RAV KPH-40NCGA) 240v

Liftmaster LME4003 (Rav KPH-40NECGA) 415v

4000 Kg lifting capacity. Electro-Hydraulic Operation. Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position. Twin hydraulic rams requiring little maintenance. Robust arm locking device.  Manual release by lever. Pad height 100mm-136mm. Drive through width 2506mm. Width between columns 2764mm.  Max lift height 1863mm.  Overall width 3334mm . Overall height 4000mm.Supplied with extension arms, Front extension 715mm – 1,051mm, rear arms 775mm – 1,138mm. Site requirements 200mm concrete. 2 years full manufacturers. 4 x 65mm height extensions included.                                  

liftmaster LM4503

Liftmaster LME4001(RAV KPH-40NCGA) / Liftmaster LME4003 (Rav KPH-40NECGA)

Liftmaster LME4001(RAV KPH-40NCGA)4000 Kg lifting capacity. Electro-Hydraulic Operation. Single Phase: 240V Supply Protected By 30 Amp (C-Rated) Breaker.

Liftmaster LME4003 (Rav KPH-40NECGA) 4000 Kg lifting capacity. Electro-Hydraulic Operation. 3 Phase: 440V Supply, Neutral & Earth Protected By 16 Amp (C-Rated) Breaker. 

DELIVERED AND INSTALLED   

4500 Kg lifting capacity. Electro-Hydraulic Operation.       

Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position.

Twin hydraulic rams requiring little maintenance.

Robust arm locking device.  Manual release by lever. Pad height 100mm-136mm.

Drive through width 2506mm.

Width between columns 2764mm. 

Max lift height 1863mm.  Overall width 3334mm .

Overall height 4000mm.

Supplied with extension arms, Front extension 715mm – 1,051mm, rear arms 775mm – 1,138mm.

Site requirements 200mm concrete.

2 years full manufacturers.

4 x 65mm height extensions included. 

DELIVERED AND INSTALLED                                  

BM20200 Mobile HGV Brake Tester

BM20200 Mobile brake tester, surface mounted, eliminating the need for groundwork so the equipment can easily be moved between locations and quickly set up to carry out testing. Simple to use and upon completion of testing produces a printed report detailing the information required by DVSA in the UK. Ideally suited for fleet operators carrying out periodical testing of their vehicles and for servicing facilities conducting diagnostic testing or post-repair testing of vehicles.

  • Mobile design for easy location
  • In cab lap top operation
  • Bi-directional testing
  • High friction durable rollers
  • Braked rollers for easy access and egress
  • 20t axle drive over.
  • Integral axle weighing system
  • IP55 Protection
  • Suitable for outdoor use
  • Suitable for testing 4WD vehicles
  • Motors          415v 50Hz 3ph 2 x 11kW

https://bmtest.dk/wp-content/uploads/2016/09/Brochure-BM20200-EN-web.pdf

Videos

Tecalemit CV3000 On-Truck Brake Lathe.

Tecalemit CV3000 On-Truck Brake Lathe. Preparing HGV brake discs as part of an HGV service schedule can increase brake performance in preparation for periodic brake safety checks. Skimming commercial discs has many advantages for Fleet Managers, Operators, Councils and Workshops across the UK.                                                                                                           The CV3000 is designed to work directly on the vehicle to machine commercial vehicle brake discs: trucks, buses, and light commercials. It functions on all types of hubs‐ traditional or those with hub reduction. It has an adjustable feed to give optimum surface finish. Optional additional flange adaptors for various stud patterns are also available. Both faces of the brake disc are machined simultaneously. The machine works in any position so the brake caliper can remain in place.                                                                                                                                                                      Supplied complete with:                                                                                                                                             • Motorised/electronically adjustable intermittent feed mechanism                                                              • Soft‐start motor‐ electronically controlled                                                                                                                      • Adjustable trolley for ease of positioning                                                                                                                        • Pair of carbide cutting tips                                                                                                                                                           • 10‐hole hub connection (integral with the machine)                                                                                                       • Set of service spanners • Operating instructions

  • The lathe skims a disc in around 20 minutes
  • It runs automatically once correctly set, leaving your technicians free to carry out other work
  • Renews brake performance on partially worn discs
  • Extends the lifespan of brake pads and discs
  • Resurfaced discs achieve lock-out every time – no more bedding in
  • It can help eliminate brake vibration and noise
  • The lathe has adaptors that fit most vehicles up to 44 tonnes
  • Can machine double rear discs

Tecalemit SF/9257/NPD MOT VII Lift

 Tecalemit SF/9257/NPD Class VII MOT Lift (non ATL). 5000kg ,5700mm platform length.  Suitable for most extra long wheel base vans.Min height 155mm. 

With Optional radius plates OA60292.

Tecalemit SF9436/SR MOT IV lift

Tecalemit SF9436/SR

Tecalemit SF9436/SR Shallow Recess MOT IV 3500kgs capacity 4 post electro hydraulic lift.415v electrics. 4.300m long platforms. Min height 175mm  Widthbetween the post 2460mm with Radius Plates